Guest Post: How to Make a Cheap & Easy Custom Pen Holder

If you’re a freelance writer like me, chances are you’ve heard of Jenn Mattern, the brains behind All Freelance Writing (and about a billion other websites). Some of us who are lucky enough to know Jenn outside of her professional milieu have discovered her creativity knows no bounds. Whenever and wherever she sees a problem she always seems to find a solution.

A couple months ago she wanted a pen holder and decided to make one from found objects around her home. I broadly hinted that it might make a good guest post for Create From Scratch. Thankfully she agreed. Here it is. Thanks, Jenn!

 


Create a Custom DIY Pen Holder

 

When I decided to get back into writing poetry, I wanted to go “old school.” So I bought myself a new poetry journal, pen, and ink, and I looked for a pen holder that appealed to me.

No luck.

The closest pen holder I found to what I wanted was about $50 and a bit too small. I got fed up with the fruitless search before long. Then I was poking around my tools looking for something for a home repair project I needed to knock out, and a light bulb turned on.

I could make a pen holder.

After all, the simple wooden style I was after didn’t look too difficult to replicate. So I dug around the house a bit and found everything I’d need to whip up a custom pen holder. And I’ll show you that near the end of this post. But first…

When Paula saw my original pen holder, she asked if I’d be interested in a guest post to teach you how to make one. So I popped over to the craft store and picked up a few things (it’s super cheap, I swear), and I made a second one so I could take some photos and show you the basic process.

Here’s the gist of how to make your own inexpensive wood pen holder. You can swap out the two wood pieces with pretty much any material you’d like as long as you have a base and a ring of some sort to support your pen. I bet you can come up with even more creative ideas.

What You’ll Need

  • Wooden base
  • Wooden ring (Both wooden pieces are less than $1 each at a craft store like A.C. Moore or Michaels.)
  • 1 sheet of felt (or leftover pieces are probably plenty – about $.30 at the craft store)
  • Wood stain or paint of your choice (won’t need much, so whatever you have on-hand is probably enough)
  • 1 sponge applicator or brush for the stain
  • Glue (super glue, wood glue – anything strong enough to hold two wood pieces together)
  • Newspaper or paper towel to protect your work area
  • Scissors

What to Do

Step 1: Set up your work space.

I laid out some paper towel because I keep some around this desk when I’m painting anyway. But you can use newspaper, a rag, or whatever you have on-hand. You don’t need a large work space protected for this – just somewhere to stain the wood and let it sit until it dries.

Step 2: Prep the wood.

My mistake with this new pen holder was that I didn’t realize how rough the edges of the base looked until it was stained. I highly recommend sanding both pieces lightly to get a consistent surface.

Step 3: Stain the wood.

Apply your choice of stain (or paint if you prefer) to both pieces of wood. You don’t need to do the inside of the ring, as that will be covered with your felt later, but do make sure you stain the entire upper edge of the ring. Set both pieces aside to dry.

Step 4: Glue the ring to the base.

Apply a thin line of super glue (or wood glue, or whatever strong adhesive you have around) to the bottom of your wooden ring. Carefully place it where you want it on the base, and apply gentle pressure. You don’t want to add so much glue that it seeps out onto your wood base when you press down.

Step 5: Cut and apply your felt pieces.

Start with your base. In my case, this was simply a small felt circle. It’s okay if your base is slightly smaller, as your wall piece will cover any small gaps around the bottom. Push it to the bottom of the ring. No need for glue. It’ll actually go through the felt and make a mess anyway.

For the wall of your ring, simply cut a strip of felt as wide as your ring is tall. Leave it a bit longer than you think you’ll need. Then roll that felt strip tightly and insert it into the ring. Let it open, and gently press it against the walls.

If your felt ends overlap, pull the strip out and trim a little at a time until the two ends meet perfectly. If you do this, you won’t need an adhesive at all. You can use glue if you’d like, but I preferred to avoid the risk of any seeping through and making contact with my pen.

There you have it – your new pen holder!

What I’d Do Differently

If I were to start over with this project, I’d have done a few things differently:

  • I would have chosen a slightly larger base.
  • I would have sanded the wood first.
  • I would have sealed it with a clear coating to give it a smoother finish and some shine.

Those are just things to keep in mind that you can tweak to make your own pen holder a bit nicer than this one. But this isn’t the one I’m actually using, so I wasn’t too worried about it. You see, my first was made from “found items” instead – I had everything around the house already. Here it is:

For this one, the base was a rosewood flooring sample I had lying around from when we were looking into replacing flooring around the house. And the ring is the decorative ring from a WoodWick scented oil dispenser (there’s a logo on the back end that no one’s going to see from my desk). The wood of both just happened to match perfectly.

I glued the ring to the flooring tile and use self-adhesive felt pads, cut to fit (the little felt pieces you stick to the bottom of furniture legs to make them slide easier).

The only problem I had left was the ridge in the front of the flooring sample. I happened to have some insulation tubing that fit perfectly. It was white, so I pulled out a Sharpie to make it look like a simple black rubber accent.

It was a project done on-a-whim, made from things that would have otherwise been thrown away. So, even though the craft store version is cheap (I spent less than $2.00 because I already had stain, a foam brush, the felt pads, and glue), you very well might be able to whip one up for free!

 

To check out another one of Jenn’s recent creative inspirations—a way to make her regular desk transform into a standing desk and back again—check out her recent blog post at All Freelance Writing.

 

Advertisements

About Paula Hendrickson

I'm a full-time freelance writer with an addiction to yarn, cooking and all kinds of crafty things. I come from a long line of creative and entrepreneurial types on both sides of the family, making creativity almost like competitive pursuit.

Posted on October 1, 2017, in guest post, How-to, Projects, reusing, upcycling, utilitarian and tagged , , , , , , , , , , , , , , . Bookmark the permalink. 6 Comments.

  1. Paula Hendrickson

    Thanks for the great post, Jenn. And taking the time to make a second pen holder so you could take photos of your penholder-in-progress.

  2. Looks like ideal for Etsy, Jenn.

    • Paula Hendrickson

      Indeed!

    • Jennifer Mattern

      lol I don’t have the energy to try to sell anything else. But yes, I could see them going over well there… especially with a bit of varnish. Could be fun for someone to try. The only big change I’d make in that case might be to nail or screw the ring on from beneath so it’s more stable for shipping. And I didn’t think of it at the time, but if you buy a whole sheet of felt instead of using scraps, maybe gluing a felt bottom to the base would be smart so it doesn’t scuff a desk and looks a bit more “finished.”

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Roving Crafters

a place to share knitting, crocheting, and spinning adventures

Mika Doyle

A Personal Guide to Professional Career Goals

Permacooking

Delicious ways to reduce food waste

alifemoment

Colourful Good Food & Positive Lifestyle

Lattes & Llamas

we live for wool and bleed espresso

WGN Radio - 720 AM

Chicago's Very Own - Talk, News Radio - Sports, Traffic, Weather, Blackhawks, Northwestern, Listen Live - wgnradio.com

Genevieve Knits

A Blog for Vampire Knits and Once Upon A Knit

The Tommy Westphall Universe

The little boy, the snowglobe and all of television

Grace's Place

Someone in Jersey Loves You

theflexifoodie.wordpress.com/

Delicious plant-based, whole food recipes & my healthy living tips!

All Night Knits

Sleep All Day. Knit All Night.

UK Crochet Patterns

We seriously heart crochet and love to promote patterns in UK terms!

Funky Air Bear

Traditional & Modern Knits

Recording "Guitarrista!"

A topnotch WordPress.com site

Agujas

The Art of Knitting

Simply Flagstaff

A Blog About Getting Back to Basics

Cook Up a Story

Super Foods for Growing Families

The Daily Varnish

The daily musings of two nail polish addicts.

My Crafting Diary

Crafts, Garden, Dog and Cats

Fika and more

Baking, living and all the rest

my sister's pantry

Eat food... real food

made by mike

Just another WordPress.com site

Chilli Marmalade

Adventures inside and outside my kitchen

en quête de saveur

a flavor quest

maggiesonebuttkitchen

Passionate about cooking and baking and love to share.

Doris Chan Crochet

Musings from Doris Chan, crochet designer, author, space cadet

Going Dutch

and loving it

Happiness Stan Lives Here

Notes from Nowhere Near the Edge

Brett Bara

Just another WordPress.com site

Black Bear Journal

Just another WordPress.com site

Words on the Page

Just another WordPress.com site

Patons Blog - We've moved!

Patons Fans with Patons Yarns and Patons Patterns

%d bloggers like this: