One of the first things my sister and I did after she gave me a new sewing machine for Christmas in 2015 was hit the fabric store.
The first place I like to stop in any fabric shop is the remnants area. You can find small amounts of expensive fabric for a fraction of the price. On that trip we found a lot of remnants to turn into throw pillows. We both loved a silky muted blue-green fabric with copper-colored French knots.
I thought it would be perfect to replace the faded fabric inserts in the shutters in the back bedroom. Fortunately there were two pieces of that fabric so we didn’t have to fight.
To underscore the cost-savings of buying remnants: this “designer” fabric was originally priced at a ridiculous $29.99 per yard, but was only $5 per yard as a remnant. The $5.63 piece was 1.125 yards (just enough for this project), and the $9.76 piece was 1.952 yards. I should be able to cover a couple pillow forms with the larger piece.
Yes. I know. I sure took my time before using any of those remnants. Probably because I didn’t realize how badly faded the old fabric was until I removed all eight inserts from the shutters. They’ve been getting the afternoon sun for the better part of a decade, so I’d say the plain cotton quilting fabric held up very well, despite the sun bleaching.
The first thing I did was measure the old inserts and the new remnants. Having replaced these inserts before, I knew the upper and lower shutters were different lengths, and the old inserts were each about eight inches wide, roughly double the width of each shutter. While the front of the fabric doesn’t appear to have an up-and-down direction to it, the back does, so I wanted to cut all eight panels in the same direction.
Of course, it was only after cutting the shorter panels that I realized I forgot to allow the extra two inches needed to form pockets for the small tension rods that hold the top and bottom of each panel in place.
Luckily I had the second remnant. No worries, either. The four mis-cut panels should still work well for the pillow covers.
After all the pieces were properly cut, it was pretty much an assembly line process:
- Press a quarter-inch fold, towards the back, on all of the long edges. (On the old inserts, I folded the fabric twice for a clean, finished edge, but the French knots in this fabric create more bulk, and would be difficult to sew over when sandwiched between two layers of cloth.)
- Sew the side hems.
- Form pockets for the tension rods on one end of each panel, starting with a quarter-inch fold for a clean edge, then fold again, approximately one inch. Press and pin.
- Sew the pockets.
- Next is the only fussy part: figuring out the right length for the second pocket. I knew the four upper panels needed to be 24-1/2″ and the lower ones 27-1/2″. I folded, and measured carefully before pressing, pinning, and sewing.
Once all of the panels were sewn, it was time to slip them on the tension rods and into the shutters. How cool that the copper rods coordinate so well with the fabric!
Uh-oh. Time for the embarrassing photo. But I need it to show you how the panels fit into the shutters, so try really hard to ignore the fact that I never painted the back side of the shutters.
Only two of the panels were a little tight. But my dad made these shutters long ago, so the spaces for the little rods are no more precise than the lengths of the new inserts. I just tried the tight ones in different openings and they all fit without needing any of the pockets to be ripped out and re-sewn.
Once all eight panels were in, I noticed a happy accident: Shadows of those cool ribbons I love show through in daylight, creating a whole new look.
It’s like getting two looks from one project.
In a few years, once the sun has done its damage, I wonder what kind of patterns those ribbons on the back will have created.
What d-i-y projects have you done lately?