Thanks to a hail storm, a couple months ago the old family bungalow got a brand new roof. The original part of the house had three layers of asphalt shingles on top of the original cedar shakes, so the roofers did a total tear off.
Being both sentimental and crafty, I decided to save a small box full of cedar shakes in case inspiration struck. I cleaned them with TSP and let them dry in the sun, as advised by the helpful people at a neighborhood hardware store.
Over 50 years ago, a previous owner accidentally started a house fire, so some of the shingles were a bit scorched, but most were simply well worn. I set them on the table and started toying around with ideas. I decided to make frames and wound up buying simple wooden photo frames at the craft store – unfinished wood that’s ready to be painted or decorated.
After arranging the pieces, I glued the shakes together with strong glue and weighed each frame down with a large book. Twenty-four hours later, I glued the shakes to the photo frame using the same process. I didn’t like seeing the light wood from the sides, so I used good old crayons (black and various shades of brown) to help camouflage the edges.
This is what I came up with:
I made two, and didn’t even realize that I’d crossed them in opposite directions. I wanted each frame to have at least one scorch mark and a nail hole or two. I made the frames for my brother and sister, so on the back I wrote a note about where the shakes came from. My sister happened to see the shakes piled on the table during my first attempt to nail them together (turns out the wood is too delicate for that). She thought it was a cool idea and suggested gluing them, so she probably wasn’t too surprised to unwrap one!
The frames are light weight, but I really hope the glue holds! (If not…re-glue!)
Next I’ll make one for myself.
What are some creative ways you’ve repurposed something destined for a landfill, and what did you make from it?